English 
more 
English  |
| Quantity: | |
|---|---|
lizheng
100μm matte white PP self-adhesive sticker paper, factory-direct from LIZHENG. This premium synthetic label stock combines a waterproof, tear-resistant polypropylene face with a high-tack permanent adhesive — engineered specifically for desktop and office-grade inkjet/laser printers. Available in A4 sheets, A3 sheets, or custom-cut dimensions for label converters, print shops, and industrial users. No special equipment needed: just load, print, peel, and apply.
Tell us your quantity and printer type — we'll send the right grade. Response within 24 hours.
Request Quote & Samples →Traditional paper labels fail when exposed to water, oil, handling, or outdoor conditions. PP (polypropylene) synthetic label stock solves these problems at the material level — without the cost premium of PET or vinyl.
| Pain Point | Paper Label Problem | PP Self-Adhesive Solution |
|---|---|---|
| Water Exposure | Ink runs, paper disintegrates, label peels off | 100% waterproof face — label stays intact even when submerged |
| Oil & Grease | Stains through, adhesive dissolves | Oil-proof surface — ideal for food, chemical, and industrial labeling |
| Tearing & Scuffing | Labels rip during application or transit | Tear-resistant PP film — survives rough handling and shipping |
| UV & Outdoor | Fades within weeks, label becomes brittle | Light-resistant PP — withstands outdoor exposure far longer than paper |
| Consistency | Batch-to-batch variation causes printer jams | Synthetic film with tight caliper tolerance — smooth, jam-free feeding |
| Parameter | Specification | Notes |
|---|---|---|
| Face Material | Matte white PP (polypropylene) film | Also available: transparent, glossy |
| Thickness | 100μm (face) + adhesive + liner | Customizable: 60μm–150μm |
| Adhesive Type | Permanent acrylic water-based adhesive | Removable / high-tack options available |
| Liner | White glassine release liner | Clean release, no residue |
| Printer Compatibility | Inkjet + Laser (mono & colour) | Matte topcoat for ink adhesion & toner bonding |
| Sheet Size | A4 (210×297mm) / A3 (297×420mm) | Custom sizes: die-cut to any shape |
| Finish | Matte white | Smooth surface, non-glare readability |
| Water Resistance | 100% waterproof | Suitable for wet/cold chain environments |
| Temperature Range | -20°C to +80°C | Freezer-safe, no brittleness |
| Packaging | 100 sheets/ream or custom count per box | Bulk rolls also available for converters |
One of the most common complaints we hear from label resellers and print shops: "The PP sheets jam my printer" or "Ink won't dry on the surface." These failures cost time, waste material, and erode customer trust.
Our 100μm matte PP self-adhesive sheets are engineered to solve exactly this. The key is the matte topcoat — a micro-porous coating applied to the PP surface that:
For Inkjet: Absorbs ink rapidly, prevents smudging. No need for special inkjet-coated paper.
For Laser: Provides the right surface roughness for toner adhesion. Fuses cleanly without peeling or chipping.
For Both: Consistent caliper (thickness) tolerance of ±5μm ensures smooth feeding through standard office printer trays — no jams, no double-feeds.
Matte topcoat absorbs ink instantly. Works with dye & pigment inks.
Toner fuses cleanly. No chipping, no ghosting, no drum damage.
Tight ±5μm caliper tolerance. Consistent tray feeding, sheet after sheet.
Every batch tested on HP, Canon, Epson & Brother before dispatch.
Not sure which grade fits your printer model? Tell us your printer brand and model — we'll recommend the right sheet.
| Industry | Use Case | Why PP Self-Adhesive Sheets |
|---|---|---|
| Food & Beverage | Product labels, ingredient stickers, cold chain tags | Waterproof + oil-proof. Survives refrigeration and condensation. |
| Logistics & Warehousing | Shipping labels, barcode tags, inventory stickers | Tear-proof during transit. Scannable even when wet. |
| Retail & Branding | Product stickers, price tags, promotional labels | Matte finish for premium look. Vibrant print on white PP. |
| Cosmetics & Personal Care | Bottle labels, jar stickers, tube wraps | Oil-resistant. No peeling from lotions, oils, or bathroom humidity. |
| Office & Education | Name badges, folder labels, equipment tags | Standard A4 sheets — no special printer needed. DIY-friendly. |
| Label Converters | Raw stock for die-cutting, overprinting, finishing | Available in master rolls. Consistent adhesive for downstream processing. |
We understand that off-the-shelf sheets rarely match every buyer's exact requirement. As a manufacturer, we customize at source:
Custom Sheet Sizes: Beyond A4/A3 — any dimension up to 330×480mm. Pre-die-cut shapes available.
Custom Adhesive: Permanent, removable, ultra-high-tack, freezer-grade — specify your application.
Thickness Options: 60μm to 150μm PP face film. Thicker for durability, thinner for cost optimization.
Finish Options: Matte (standard), glossy, or transparent PP. Also available: white PET, clear BOPP, vinyl.
Private Label Packaging: Your brand on the ream wrap and carton. Custom barcodes and product codes included.
Bulk Rolls: For label converters: master rolls in custom widths, with or without slitting.
We customize every parameter — sheet size, thickness, adhesive type, and packaging. Quote within 24 hours.
Request Custom Quote →For B2B buyers ordering in bulk, one question always comes first: "Will every sheet perform the same?" Our QC process ensures the answer is yes:
Incoming Raw Material Check: PP film caliper, adhesive coat weight, liner release force — all measured before production.
Coating Consistency: Matte topcoat applied with ±2μm tolerance. No patchy areas that cause print defects.
Printer Testing: Every production batch is tested on HP, Canon, Epson, and Brother printers — both inkjet and laser. We verify feeding, ink adhesion, and toner bonding.
Adhesion Testing: 90° peel test on stainless steel, glass, and corrugated board. Consistent peel force across the entire roll.
Pre-Shipment AQL Sampling: Final inspection before dispatch. Reports available on request.
Certifications: CE, SGS, RoHS, UKCA, CTI — all materials comply with EU and international regulatory standards.
| Format | Description | Best For |
|---|---|---|
| A4 Sheet Packs | 100 sheets/ream, 10 reams/carton. Shrink-wrapped with brand sleeve. | Retail, e-commerce, small print shops |
| A3 Sheet Packs | 100 sheets/ream, 5 reams/carton. | Large-format printing, wide-format inkjet users |
| Bulk Master Rolls | Full-width rolls with liner. Custom slit widths available. | Label converters, die-cutting shops, industrial users |
| Private Label Cartons | Your branding on ream wrap and master carton. Barcode included. | Brand owners, distributors, resellers |
Shipping: FCL (20ft / 40ft) and LCL available from Qingdao, Shanghai, Ningbo, or Shenzhen — we use the port closest to your logistics chain. Air courier samples via DHL/FedEx/UPS.
Advanced Factory Production Line
Strict In-House Quality Control
Premium Adhesive & Smooth Release
Ready for Global Export
We coat, slit, and pack in-house. Full control over quality and lead times.
HP, Canon, Epson, Brother — every batch tested before dispatch.
Proven export logistics. Consistent quality across repeat orders.
Size, thickness, adhesive, finish, packaging — all adjustable.
Fully certified. Test reports available for your compliance needs.
Q: Is this PP sheet compatible with my HP/Canon/Epson/Brother printer?
A: Yes. Our matte topcoat is formulated for universal inkjet and laser compatibility. We test every production batch on all four major brands. If you have a specific model, contact us and we'll confirm compatibility.
Q: What is the MOQ for bulk orders?
A: Standard MOQ is 500 kg per specification. For trial orders, we offer flexible smaller quantities. Contact us with your requirements for a tailored quote.
Q: Can you supply in roll format instead of sheets?
A: Yes. We supply master rolls, slit rolls, and finished rolls — with or without die-cutting. Specify your roll width, core size, and roll diameter when inquiring.
Q: Do you offer different adhesive strengths?
A: Yes. We stock permanent, removable, and ultra-high-tack adhesives. For special applications (freezer-grade, high-temperature, curved surface), please specify during inquiry.
Q: Can I get a free sample before placing a bulk order?
A: Yes. We provide free A4 sample sheets of our standard grades. For custom specifications, pre-production samples are available. Courier shipping via DHL/FedEx/UPS.
Q: Can you print my design on the label sheets?
A: No — we manufacture the blank label stock. You print your design using your own inkjet or laser printer. If you need pre-printed labels, we can recommend printing partners.
Q: What is the typical lead time for bulk production?
A: Standard lead time is 15-25 days after order confirmation and deposit. Custom specifications may add 5-10 days for adhesive or size changes.
Q: What payment terms do you accept?
A: T/T (30% deposit, 70% before shipment or against B/L copy), L/C at sight. Terms negotiable for repeat customers.
Tell us your size, quantity, and printer model — we'll send a quote and free sample. Response within 24 hours.
Contact Us — Get Quote & Sample →